The gazebo comes with:
- Gazebo support columns (round tube diam.mm.60X thickness mm.1.5)
- Perimeter rectangular section tubes (rectangular tube mm.80X40xspess. Mm.1.5)
- Purlins (round tube diam.mm.60X thickness mm.1.5)
- Connection joints (corner, feet, ridge)
- Tir straps (pvc for locking the fabric to the frame)
- Ratchets (where necessary)
- Ground anchors
- Assembly bolts and self-drilling
- Cover sheet in fireproof cl.2 pvc fabric
- Cloth tensioning kit (base + adjustable butterfly and steel support for cloth tightening)
The materials supplied can vary in size and quantity depending on the customer's requests.
PERIODIC MAINTENANCE OF GAZEBO ON A MONTHLY PERIOD
CHECK THE STABILITY OF THE STRUCTURE, THE MAINTENANCE AND THE EFFECTIVENESS OF THE GROUND ANCHORING.
TENSOCOVERINGS recommends the inspection of the structures, the covering sheet and the anchors which should be carried out at least once a month and after any acute atmospheric phenomenon such as strong wind, intense and persistent rain, snow.
The metal parts, the joints and the canvas must be visually inspected to promptly report any abrasions, oxidations or tears. Though it is extremely rare to occur, the structure must in this case be temporarily removed and subjected to adequate maintenance.
CHECK THE TENSIONING OF THE COVER.
Periodically checking the tension of the fabric is very important as it directly contributes to the stability of the structure. Bringing the sheet back to optimal tension is very simple: just turn the butterfly by turning it.
MAKE SURE THAT THE CROSS RODS, SUPPLIED IN THE KIT, ARE FITTED IN FRONT OF THE SIDE WALLS
This is if the side sheets are inserted, to contain the sail effect due to the wind.
WARNINGS AND RECOMMENDATIONS
Any tampering with components not authorized in writing by the manufacturer will invalidate the responsibility of the manufacturer and the seller. In case of deformation or damage, replace the damaged parts with original TENSOCOVERINGS parts.
CLOSING ONLY ONE WALL OR ONLY TWO WALLS IS NOT RECOMMENDED.
The assembly of the structure must always take place in conditions of symmetry to ensure balance and the configuration, dimensions and measures provided for in the project documents (technical data sheet) must be respected.
Both the first assembly and the subsequent ones must be carried out in favorable weather conditions, scrupulously observing the instructions in the instruction manual. If you encounter any unforeseen events during the installation phase, contact TENSOCOVERINGS www.tensocoverings.it.
ELIMINATE THE ACCUMULATION OF SNOW FROM THE COVER
The removal of snow from the roofing sheet is highly recommended and must be assisted with mechanical action to prevent the formation of pockets of snow or water.
The columns must be anchored to the ground through suitable anchors for fixing to the foot and the connections must prevent lifting and translation. If the flooring is unsuitable for anchoring with dowels, special foundations (plinths) must be made.
COMPLIANCE WITH THE LAWS IN FORCE, WARRANTY AND CERTIFICATION
All the materials that make up the gazebo comply with current regulations.
The warranty against manufacturing defects is 2 years.
The warranty is void in the event of incorrect installation, tampering, incorrect use of the elements, lack of maintenance and verification of integrity. Tensocoverings is not liable for damage attributable to extraordinary atmospheric and geological events or natural disasters.
The Gazebo Professional Bazar is equipped with Static certification of wind resistance, in relation to the Wind Zone in which it can be used.